Guide

Move-in inspection checklist for UAE rentals

By Tenify teamPublished 3 November 2026

Guidance is illustrative, please refer to official sources for the latest rules.

A move-in inspection checklist is a room-by-room record of how a rental looked on the day you received the keys. In Dubai and across the UAE, tenants who photograph faults, note missing items and keep a dated report make later conversations with the landlord or agency clearer. This guide covers what to inspect, what to photograph and how to turn the walkthrough into a shareable property condition report.

Why a move-in inspection matters

Most UAE tenancies start with a handover. The agent or landlord walks you through the home, you sign for the keys, and life begins. Months later, when the lease ends, both sides look back at the same rooms. Without a dated record from day one, it is hard to separate what was already worn from what changed during your stay.

A move-in checklist is not a court filing and it does not replace official processes such as Dubai Land Department tenancy registration or guidance published for the Rental Disputes Centre. It is a practical record you control: rooms, items, ratings and photos, collected before you unpack.

When to run the inspection

  • On handover day, before you move furniture in.
  • While the lights work and every room is empty enough to see walls and floors.
  • With enough battery and storage on your phone for dozens of photos.
  • Before you report any urgent faults verbally only — put them in the written record too.

If the agent is present, ask them to wait while you finish each room. A calm, complete walkthrough beats a rushed set of phone snaps taken after the sofa is already against the wall.

Move-in inspection checklist (room by room)

Work through the home in a fixed order so you never skip a space.

  1. Entry and hallway — doors, locks, keys, flooring, light fittings, intercom, shoe cupboard.
  2. Living room — walls, ceilings, windows, AC, curtains, flooring, TV points, furniture if furnished.
  3. Kitchen — cabinets, worktops, sink, taps, appliances, extractor, tiles, under-sink plumbing, fire extinguisher if present.
  4. Bedrooms — walls, wardrobes, windows, AC, flooring, sockets, built-in storage.
  5. Bathrooms — taps, shower, WC, tiles, mirrors, extractor fan, silicone seals, water pressure.
  6. Balcony, maid's room, storage, parking — anything listed on the tenancy contract that forms part of the home.

What to record in each room

RoomItemWhat to look for
Living areasWalls and paintScuffs, holes, patches, damp marks, uneven paint
Living areasFlooringScratches, stains, lifted tiles, gaps at skirting
KitchenAppliancesPower on, seals, filters, missing racks, burnt elements
KitchenPlumbingLeaks, slow drains, stains under the sink
BathroomsFixturesCracks, mould on silicone, loose taps, weak pressure
All roomsWindows and ACSeals, condensation, remote control, unusual noise
Furnished unitsSoft furnishingsStains, tears, missing cushions, worn seats

Rate each item in plain language (for example good, fair, poor) and add a short note when something is worn or damaged. Photos should show the fault clearly and, where useful, a wider shot of the room for context.

Photos that help later

  • Take wide shots of every wall and floor before close-ups of faults.
  • Include a date stamp only if your phone adds one reliably; the report date matters more.
  • Photograph meter readings (electricity and water) on day one.
  • Capture serial numbers on major appliances when they are visible.
  • Keep originals; do not rely on compressed chat-app copies alone.

Furnished apartments: inventory as well as condition

If the unit is furnished, treat the inventory as a second checklist. Confirm every listed item is present, then record its condition. Sofas, mattresses, dining chairs and soft furnishings wear quickly; note stains and tears on day one so they are not debated at move-out.

For a deeper inventory walkthrough, see our forthcoming furnished apartment inventory guide. Until then, use the same room order above and add a line for each piece of furniture in the room.

How this ties to Ejari and official paperwork

In Dubai, tenancy contracts are typically registered through the Ejari system. Your move-in checklist does not replace registration, deposit terms in the contract, or advice from official sources. Keep the checklist alongside your signed contract, Ejari certificate and any handover form the agency provides. If the agency asks you to sign a handover sheet, make sure your photos and notes match what you sign.

Turning the checklist into a property condition report

A checklist on paper or in Notes works. A structured property condition report goes further: every room in order, every item rated, every fault photographed, and one PDF both sides can open. That is what Tenify builds on iPhone — free until the end of 2026.

After the walkthrough, share the PDF with your landlord or agency and keep your own copy. At move-out, run the same rooms again so you can compare like with like. For the format itself, open a sample property condition report.

Quick day-one packing list

  • Charged phone with free storage
  • Torch or phone light for cupboards and under sinks
  • Step stool if needed for high cupboards (safely)
  • Printed or digital copy of the tenancy inventory if one exists
  • Time blocked before furniture arrives

Related reading